Price
$1,298.00 CAD
Stock
100+ In Stock

  • Power Cord - BS Standard
  • Interface Connection - Ethernet Interface

Specifications

Accuracy

  • ± 0.02 % of Setting - DC Voltage Generation
  • ± 0.03 % of Setting - DC Current Generation

Approvals & Certifications

  • AS
  • BS
  • CSA
  • GB
  • IEEE 488
  • UL
  • VDE

Communication

  • Baud Rate: 9,600, 14,400, 19,200, 38,400, 57,600, or 115,200 bit/sec
  • Ethernet Conforms to IEEE 802.3
  • Full Duplex Transmission Mode - RS-232 Interface
  • GPIB Interface Conforms to IEEE Standard 488
  • RS-232 Serial Interface Conforms to EIA
  • USB Conforms to Rev. 1.1

Consumption

  • 200 VA Approximately

Current

  • 20 μA to 3.2 A - Current Generation/Measurement Range

Delay Time

  • 1 microsecond to 3,600 seconds - Source & Measurement Delay

Display

  • 256 x 64 Dots Vacuum Fluorescent Display
  • LED Display
  • Organic Electroluminescent (EL) Display

Electrical Connectors

  • BNC Connector - Synchronization Signal Input/Output Section
  • D-Sub 15-Pin - External Input/Output Section
  • D-Sub 9-Pin - RS-232 Interface
  • RJ45 Connector - Ethernet Interface
  • Typical B Connector (Receptacle) - USB Interface

Frequency

  • 50/60 Hz

Humidity

  • 20 to 80 % Relative Humidity

Input

  • TTL - I/O Level

Maximum Voltage

  • ± 250 V Peak between the Generation (Measurement) Terminal & Case - Common-Mode Volatge
  • 1 V between Output & Sense Terminal - Input/Output
  • 110 V between High & Low Terminal - Input/Output

Measuring Time

  • 1 microsecond to 3,600 seconds - Source-Only Operation
  • 1 millisecond to 3,600 seconds - Source & Measure Operation

Mounting

  • Rack-Mounted

Operating Temperature

  • 5° to 40° C (41° to 104° F)

Output

  • ± 0.5 A (Output Voltage of ± 110 V or Less) - Max.
  • ± 1 A (Output Voltage of ± 60 V or Less) - Max.
  • ± 2 A (Output Voltage of ± 30 V or Less) - Max.
  • ± 3.2 A (Output Voltage of ± 12 V or Less) - Max.
  • Current Sinking & Source is Possible Up to 110 V, 3.2 A & 60 W

Output Noise

  • 8 mV Peak-to-Peak (DC to 20 MHz) with Generation at 2 V Range & Limiter at 1 A Range

Power Requirement

  • 12 V - Power Supply for Automobiles
  • 24 V - Power Supply for Automobiles
  • Lithium-Ion Batteries
  • Nickel-Hydride Batteries

Pulse Range

  • 10 µs or Greater - Min. Pulse Width (External Input/Output)
  • 100 µs to 3,600 seconds, 1 microsecond Resolution (During Source-Only Operation) - Pulse Width

Resolution

  • 1 microsecond - Pulse Width, Period Time, Source & Measurement Delay
  • 1 μV to 1 mV - DC Voltage Generation
  • 100 PA to 10 μA - DC Current Generation
  • 5.5-Digits - Output & Measurement Resolution

Response Time

  • 100 µs: Time to Reach ± 0.1 % of Final Value at 20 V - Voltage Generation
  • 400 µs: Time to Reach ± 1 % of Final Value at 20 mA - Current Generation

Supply Voltage

  • 100-120 Vac
  • 200 mV-110 V - Voltage Generation / Measurement Range
  • 220-240 Vac

Update Time

  • At Least 60 minutes - Warm-Up Time
show more