Images are representations only.
ER Start/Stop Linear Position Sensor
Brand: Temposonics an Amphenol CompanyRobust, non-contact and wear free, the Temposonics linear position sensors provide the best durability and precise position measurement feedback in harsh industrial environments.
Measurement accuracy is tightly controlled by the quality of the waveguide manufactured exclusively by MTS Sensors.
The Temposonics® ER has an aluminum rod-and-cylinder design where the rod can extend and retract from the sensor housing to measure linear position.
Inside, a magnet is secured to the end of the rod and remains protected within the sensor electronics housing. Accessory rod ends are available for attaching the rod to the machine’s moving part.
The rod-and-cylinder sensor design can be installed in any orientation, and provides a convenient and versatile position feedback solution.
Typical fields of applications are printing and paper industry, machine tools and plastics industry as well as control systems.
Specifications
Approvals & Certifications
- CE
- EMC Electromagnetic Emission EN 61000-6-3, Immunity EN 61000-6-2
- UL 61010-1
Approvals & Certifications
- ISO 9001 (DQS)
Communication
- Start/Stop: RS-422 Differential Signal
Consumption
- Current Consumption: 50 to 100 mA
Electrical Connectors
- M12 (8-Pin) Male Connector
Electrical Protection
- Overvoltage Protection: up to 36 Vdc
- Polarity Protection: up to -30 Vdc
Enclosure, Body Material
- Sensor Electronics: Aluminum
Environmental Protection
- Ingress Protection: IP67 (If Mating Connectors are Correctly Fitted)
Humidity
- 90 % Relative Humidity, Non-Condensing
Length
- Stroke Length: 2 to 60” (50 to 1,500 mm)
Linearity
- < ± 0.02 % of Full Scale (Min. ± 60 µm)
Materials of Construction
- Guided Driving Rod: Aluminum
Metric Connection
- M6
Mounting
- Clamp
Mounting Position
- Any Orientation
Operating Temperature
- -40° to 75° C (-40° to 167° F)
Operating Voltages
- 24 Vdc (-15 / 20 %)
Principle of Operation
- Magnetostrictive Principle
Repeatability
- ≤ ± 0.005 % of Full Scale (Min. ± 20 µm)
Shock
- 100 G (Single Shock) IEC 60068-2-27
UNF/UNC Connection
- 1/4”-28 UNF
Vibration
- 5 G (10 to 2,000 Hz), IEC 60068-2-6 (Resonance Frequencies Excluded)
Voltage
- Dielectric Strength: 500 Vdc (DC Ground to Machine Ground)
- Control Systems
- Machine Tools
- Plastics Industry
- Printing & Paper Industry
