CA150 Handy Calibrator

Brand: Yokogawa Electric Corporation

The CA150 Handy Calibrator is a portable, multi-function calibration device that can handle a wide variety of tasks ranging from verifying multimeters, temperature controllers, and frequency meters.
 
It is able to precisely source and measure voltage, current, resistance, pulse and thermoelectromotive force signals, as well as generate specialized outputs such as signal stepping and ramping. 

The unit can be battery powered for true portability, or connected to an AC outlet.
Features
  • Highly accurate within 0.02% of the DC voltage range for source and measure
  • Source and measurement can be performed simultaneously.
  • Vertical body with large-screen display
  • Loop power supply function (24 VDC at a load of max 22 mA). It is possible to measure current in the mA range while supplying power.
  • Sink function
  • Sweep functions that allow 3 types of continuous outputs:
    • Step sweep function
    • Linear sweep function
    • Program sweep function

Specifications

Accuracy

  • Amplitude Accuracy: ± 10 %

Approvals & Certifications

  • CE
  • CSA
  • EMC EN 61326-1 Class B, EN 55011 Class B Group 1 EN 61000-3-2, EN 61000-3-3
  • UL

Battery Life

  • 10 Hours Approximately - when NiMH Battery is Used
  • 8 Hours Approximately - when 6 Batteries are Used

Communication

  • Serial Interface RS-232 D-Sub 9-Pin Connector

Frequency

  • 0.01 Hz to 50 kHz

Humidity

  • 20 to 80 % Relative Humidity, Non-Condensing

Input

  • 0.01-5 mA - Excitation Current
  • 30 V

Input Power

  • 24 Vdc, Max.

Insulation Resistance

  • 50 megaohms or more at 500 Vdc: between Input Terminal & Output Terminal

Operating Temperature

  • 0° to 40° C (32° to 104° F)

Output

  • 0.1-11 V - for Frequency/Pulse
  • 10 kiloohms
  • 10 mA - Max.
  • 12 Vdc
  • 3 A
  • 5 Vdc

Power Supply

  • 1.4 A - AC Adapter Specification
  • 100-240 Vac, 50/60 Hz - AC Adapter Specification

Resistance

  • ≤ 20 ohms - Input Resistance (DC Current)
  • ≥ 1,000 megaohms - Input Resistance (DC Voltage)
  • 1 Megaohm Approximately - Input Resistance (DC Voltage)
  • 100,000 ohms - Input Resistance (Pulse)
  • 30 milliohms Approximately - Output Resistance
  • 6.5 ohms Approximately - Output Resistance

Response Time

  • Approximately 10 minutes - Auto Power-Off

RTD Type

  • JPt100
  • Pt100

Sensitivity

  • 0.5 V Peak-to-Peak

Sensor, Probe Type

  • B Thermocouple
  • E Thermocouple
  • J Thermocouple
  • K Thermocouple
  • L Thermocouple
  • N Thermocouple
  • R Thermocouple
  • S Thermocouple
  • T Thermocouple
  • U Thermocouple

Storage Temperature

  • -20° to 60° C (-4° to 140° F), 90 % Relative Humidity or Less (Non-Condensing)

Supply Voltage

  • 350 Vac/minute: between Measurement Terminal & Generation Terminal - Withstand Voltage
  • 5-28 Vdc
show more