EPD Series Electromagnetic Flow Meter

Part Number: EPD SERIES Brand: FineTek
Price
$1,345.00 CAD
Stock
3 In Stock

EPD electromagnetic flow meter is a high-accuracy flow meter manufactured based on the latest international technology. 

It is used to measure the non-magnetic liquid and plasma in the enclosed pipe.
Features
  • The measurement results are not affected by the change in liquid density, viscosity, temperature, pressure and conductivity.
  • It can be widely applied in the conducting liquids that may contain fiber, solid granules and suspended matters.
  • Enclosure protection rating: IP67/NEMA 4X
  • Wide measurement range & high efficiency
  • The wide measurement turndown ratio can be reach 1:100, which can be set randomly and achieve high accuracy for small flow measurement.
  • Multiple self-diagnosis function
  • Power-saving and low fault rate: the measuring tube is without baffle and movable parts, so it won’t cause pressure loss and jam.
  • Smart self-detection and self-diagnosis function, as well as various alarms
  • The low installation cost
  • It is easy-to-install with low requirements for the straight tube section (front 5D and rear 2D)
  • 2-wire Analog output

Specifications

Brand

Accuracy

  • ± 0.5 % of Reading at 1 m/sec (0.2 % Optional)
  • 0.1 % of Pulse Output Accuracy

Ambient Temperature Range

  • -40° to 70° C (-40° to 158° F)

Applications

  • Dyeing Machines
  • Food Industry
  • Pharmaceutical Machines
  • Seawater Desalination Plants
  • Sewerage
  • Solar Energy & PCB Wet Processing
  • Tapped Water Purification
  • Wastewater Treatment Plants

Approvals & Certifications

  • ILAC MRA
  • TAF

Cable Entry

  • Wire Inlet: M20 x 1.5 Female

Cable Length

  • 32.8 to 328 feet (10 to 100 metres) - EPD34 Remote Typical

Communication

  • Baud Rate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400 bit/sec - EPD30 Standard Typical
  • Baud Rate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600 bit/sec - EPD34 Remote Typical
  • RS-485 (Modbus): Support for ZigBee Pro-Wireless Transmission

Conductivity

  • Fluidic Conductivity: > 5 µS/cm

Consumption

  • Power Consumption: < 10 W

Current

  • Alarming Current: 22 mA
  • Alarming Current: 3.6 mA

Diameter

  • Pipe: 40 to 300 mm

Display

  • LCM 128 x 64 Pixel Backlit Typical

Electromagnetic Interference Effect

  • IEC/EN 61326-1 Class A Table 2

Enclosure, Body Material

  • Aluminum Alloy

Environmental Protection

  • IP66
  • IP67
  • NEMA 4X

Flange Material

  • Carbon Steel

Flange Size - 1-1/2” (DN 40)

  • 1-1/2” (DN 40) - 150#
  • 1-1/2” (DN 40) - 300#
  • 1-1/2” (DN 40) - JIS 10K
  • 1-1/2” (DN 40) - JIS 16K
  • 1-1/2” (DN 40) - JIS 20K
  • 1-1/2” (DN 40) - JIS 7.5K
  • 1-1/2” (DN 40) - PN 10
  • 1-1/2” (DN 40) - PN 16
  • 1-1/2” (DN 40) - PN 25
  • 1-1/2” (DN 40) - PN 40

Flange Size - 10” (DN 250)

  • 10” (DN 250) - 150#
  • 10” (DN 250) - 300#
  • 10” (DN 250) - JIS 10K
  • 10” (DN 250) - JIS 16K
  • 10” (DN 250) - JIS 20K
  • 10” (DN 250) - JIS 7.5K
  • 10” (DN 250) - PN 10
  • 10” (DN 250) - PN 16
  • 10” (DN 250) - PN 25
  • 10” (DN 250) - PN 40

Flange Size - 12” (DN 300)

  • 12” (DN 300) - 150#
  • 12” (DN 300) - 300#
  • 12” (DN 300) - JIS 10K
  • 12” (DN 300) - JIS 16K
  • 12” (DN 300) - JIS 20K
  • 12” (DN 300) - JIS 7.5K
  • 12” (DN 300) - PN 10
  • 12” (DN 300) - PN 16
  • 12” (DN 300) - PN 25
  • 12” (DN 300) - PN 40

Flange Size - 2-1/2” (DN 65)

  • 2-1/2” (DN 65) - 150#
  • 2-1/2” (DN 65) - 300#
  • 2-1/2” (DN 65) - JIS 10K
  • 2-1/2” (DN 65) - JIS 16K
  • 2-1/2” (DN 65) - JIS 20K
  • 2-1/2” (DN 65) - JIS 7.5K
  • 2-1/2” (DN 65) - PN 10
  • 2-1/2” (DN 65) - PN 16
  • 2-1/2” (DN 65) - PN 25
  • 2-1/2” (DN 65) - PN 40

Flange Size - 2” (DN 50)

  • 2” (DN 50) - 150#
  • 2” (DN 50) - 300#
  • 2” (DN 50) - JIS 10K
  • 2” (DN 50) - JIS 16K
  • 2” (DN 50) - JIS 20K
  • 2” (DN 50) - JIS 7.5K
  • 2” (DN 50) - PN 10
  • 2” (DN 50) - PN 16
  • 2” (DN 50) - PN 25
  • 2” (DN 50) - PN 40

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150#
  • 3” (DN 80) - 300#
  • 3” (DN 80) - JIS 10K
  • 3” (DN 80) - JIS 16K
  • 3” (DN 80) - JIS 20K
  • 3” (DN 80) - JIS 7.5K
  • 3” (DN 80) - PN 10
  • 3” (DN 80) - PN 16
  • 3” (DN 80) - PN 25
  • 3” (DN 80) - PN 40

Flange Size - 4” (DN 100)

  • 4” (DN 100) - 150#
  • 4” (DN 100) - 300#
  • 4” (DN 100) - JIS 10K
  • 4” (DN 100) - JIS 16K
  • 4” (DN 100) - JIS 20K
  • 4” (DN 100) - JIS 7.5K
  • 4” (DN 100) - PN 10
  • 4” (DN 100) - PN 16
  • 4” (DN 100) - PN 25
  • 4” (DN 100) - PN 40

Flange Size - 5” (DN 125)

  • 5” (DN 125) - 150#
  • 5” (DN 125) - 300#
  • 5” (DN 125) - JIS 10K
  • 5” (DN 125) - JIS 16K
  • 5” (DN 125) - JIS 20K
  • 5” (DN 125) - JIS 7.5K
  • 5” (DN 125) - PN 10
  • 5” (DN 125) - PN 16
  • 5” (DN 125) - PN 25
  • 5” (DN 125) - PN 40

Flange Size - 6” (DN 150)

  • 6” (DN 150) - 150#
  • 6” (DN 150) - 300#
  • 6” (DN 150) - JIS 10K
  • 6” (DN 150) - JIS 16K
  • 6” (DN 150) - JIS 20K
  • 6” (DN 150) - JIS 7.5K
  • 6” (DN 150) - PN 10
  • 6” (DN 150) - PN 16
  • 6” (DN 150) - PN 25
  • 6” (DN 150) - PN 40

Flange Size - 8” (DN 200)

  • 8” (DN 200) - 150#
  • 8” (DN 200) - 300#
  • 8” (DN 200) - JIS 10K
  • 8” (DN 200) - JIS 16K
  • 8” (DN 200) - JIS 20K
  • 8” (DN 200) - JIS 7.5K
  • 8” (DN 200) - PN 10
  • 8” (DN 200) - PN 16
  • 8” (DN 200) - PN 25
  • 8” (DN 200) - PN 40

Flow Rate

  • 0.45 to 254 m³/hour

Frequency

  • Frequency Output Scope: 2 to 8 Hz

Input Power

  • 100-240 Vac

Input Signal

  • Control Input (DI): Dry Contact ON< 200 ohms, 1,000 ohms < OFF, 1-CH

Materials of Construction

  • Electrode Material, Grounding Ring: 316L Stainless Steel
  • Electrode Material, Grounding Ring: Hastelloy Alloy C-276
  • Electrode Material, Grounding Ring: Titanium
  • Electrode Material: Tantalum
  • Grounding Ring: 304 Stainless Steel
  • Lining Material: NBR
  • Lining Material: Neoprene
  • Lining Material: PTFE

Measuring Range

  • Measuring Scope: 0.1 to 10 m/sec (0.33 to 33 feet/sec)

Operating Pressure

  • psi: 145 (kPa: 1,000, bar: 10)

Operation

  • Tri-Button Operation

Output

  • Analog Output: 4-20 mA
  • Pulse Mode, Control Output (DO): NPN Transistor 32 Vdc / 200 mA

Output Load

  • Maximum

Process Temperature

  • -20° to 120° C (-4° to 248° F)

Temperature Coefficient

  • Current Output: 100 ppm/°C

Time Constant

  • 0 to 100 seconds - EPD34 Remote Typical
  • 0.1 to 20 seconds - EPD30 Standard Typical

Vibration

  • IEC 60068-2-3

  • Papermaking
  • Chemical Industry
  • Metallurgical Industry
  • Drainage
  • Waste Water Treatment
  • Liquid High-Pressure Metering
  • Medical Care
  • Food
  • Environmental Protection Industries

show more