Images are representations only.
PF1 Pneumatic to Electric Converter
Brand: Yokogawa Electric CorporationThis plug-in type P/E transducer inputs 20 to 100 kPa, 0.2 to 1.0 kgf/cm² or 3 to 15 psi pneumatic pressure signal and converts it into various DC current or voltage signal.
Features- Compact type, high quality by using semiconductor pressure sensor
- No positional error
Specifications
Accuracy
- ± 0.2 % of Span
- ± 0.5 % of Span when Multi-Close Mounting
BSP Connection
- 1/4” BSPT Female
Dissipation
- 50 mA at 24 Vdc (1-5 V) - Current Dissipation
- 80 mA at 24 Vdc (4-20 mA) - Current Dissipation
Electrical Connectors
- M4 Screw Terminal
Enclosure, Body Material
- ABS Plastic
Humidity
- 5 to 90 % Relative Humidity, Non-Condensing
Insulation Resistance
- Over 100 megaohms at 500 Vdc between Output & Power Supply
Mounting
- Wall Mounted
Output
- 0 to 100 mVdc
- 0-20 mA
- -10-10 Vdc
Power Requirement
- 24 Vdc ± 10 %
Power Supply Effect
- Less than ± 0.1 % of Span for 24 Vdc ± 10 % Fluctuation
Pressure Range
- psi: 3 to 15 (kPa: 20 to 100, bar: 0.2 to 1) - Input Signal
Resistance
- 750 to 250,000 ohms - Permissable Load Resistance
Span & Zero Adjustments
- ± 5 % of Span
Supply Pressure
- Maximum
Supply Voltage
- 500 Vac/minute between Output, Power Supply - Withstand Voltage
Temperature Effect
- < ± 0.4 % of Span for a Temperature Change of 10° C (18° F) - Effect of Ambient Tempearture
Temperature Range
- 0° to 50° C (32° to 122° F)
