Images are representations only.
FF1A/FF1V P/E Transducer
Brand: Yokogawa Electric Corporation
P/E Transducer converts pneumatic signals of 20 to 100 kPa, 0.2 to 1.0 kgf/cm2 or 3 to 15 psi into current or voltage signals.
Features- Compact Type, by Using Semi-conductor Pressure Sensor
Specifications
Accuracy
- ± 0.2 % of Span
BSP Connection
- 1/8” BSPT Female - Input Signal Connecting Hole
Current
- 1-24 mA DC - Span Current Signal
Dissipation
- 45 mA at 24 Vdc - Current Dissipation
- 75 mA at 24 Vdc - Current Dissipation
Electrical Connectors
- M4 Screw Terminal
Enclosure, Body Material
- ABS Plastic
Humidity
- 5 to 90 % Relative Humidity Non-Condensing
Input
- Less than psi: 28 (kPa: 200, bar: 2) - Permissible Input Pressure
Input Signal
- 3 to 15 psi
- 20 to 100 kPa
- 0.2 to 1.0 kgf/cm²
Insulation Resistance
- > 100 megaohms at 500 Vdc between Output to Power Supply
Media
- Dry, Non-Corrosive Air
Mounting
- DIN Rail Mounting
- Rack-Mounted
- Wall Mounted
Output Signal
- 1-5 Vdc
- 0-5 Vdc
- 0-10 Vdc
- 0-1 Vdc
- 0-100 mVdc
- 0-10 mVdc
- 0-1 mA DC
- 0-10 mA DC
- 0-16 mA DC
- 1-5 mA DC
- 2-10 mA DC
- 4-20 mA DC
- 0-20 mA DC
- -10 to 10 Vdc
Power Supply
- 24 Vdc ± 10 % (Ripple Content: 5 % Peak-to-Peak or Less)
Power Supply Effect
- < ± 0.1 % of Span for 24 Vdc ± 10 % Fluctuation - Effect of Power Voltage Fluctuation
Resistance
- 2 to 250 kiloohms - Permissible Load Resistance for DC Voltage Output
- 750 to 15,000 ohms - Permissible Load Resistance for DC Current Output
Span & Zero Adjustments
- ± 5 % of Span
Supply Voltage
- 10 mV-20 Vdc - Span Voltage Signal
- 500 Vac / 1 Minute between Output to Power Supply - Withstand Voltage
Temperature Effect
- < ± 0.4 % of Span for 10° C (18° F) Change - Effect of Ambient Temperature Change
Temperature Range
- 0° to 50° C (32° to 122° F)
Zero Offset
- 0 to 200 % - Zero Elevation for Current Signal
- -100 to 200 % - Zero Elevation for Voltage Signal
