Images are representations only.
700939 FET Probe
Brand: Yokogawa Electric CorporationUsing an active probe or FET probe is an effective way to measure high speed signals.
Even when using a passive probe, you can effectively reproduce waveforms with less ringing or overshoot by devising different ways to connect to ground.
Features- Bandwidth: DC to 900 MHz (-3dB)
- Attenuation ratio: 10:1 ±2% when connected to a scope-resistance of 50 ohm ±1%
- Connector Type: BNC
- Input Resistance: 2.5MΩ
- Input Capacitance: 1.8pF
- Scope Impedance Required: 50Ω
- Compensation Range: Not Applicable
- Maximum input voltage: 10Vpp (DC + AC peak should be within ±10V)
- Nondestructive input voltage range: ±40 V (DC + AC peak)
- Cable length: 1.5m
- Power Supply Cable: 1.0m (LEMO Connector Pig-Tail)
- Standard accessories included: Earth Lead, Pincher Tip, IC Test Tip, Earth Attachment.
Specifications
Approvals & Certifications
- CE
Bandwidth
- (-3 dB), DC to 900 MHz
Cable Length
- 5 feet (1.5 metres)
Input
- 10 V (DC + AC Peak) - Max.
Ratio
- 1:10 - Attenuation Ratio
Resistance
- 2.5 megaohms / 1.8 PF - Input Resistance / Capacitance
- 50 ohms - Output
