Images are representations only.
DOX10 Power Supply Unit
Brand: Yokogawa Electric CorporationThe DOX10 power supply unit feeds power to the DO70G optical dissolved oxygen sensor and the DO402G dissolved oxygen converter.
FeaturesThe DOX10 may not be usable depending on the relevant standard of your region. If you need to do so, use a power supply that meets the following specifications.
- Use a power supply that is appropriate for the relevant standard in your region
- Use a power supply with an output voltage in the range of 24 Vdc ±10% and power consumption of 1 W or higher
- For wiring the DO70G, connect the input and output cables of the 24 V power supply by separating them by a minimum spatial distance of 3 mm and creepage distance of 6 mm
Specifications
Ambient Temperature Range
- -10° to 55° C (14° to 131° F)
Cable Length
- 5 feet (1.5 metres)
Conduit Connection
- 1/2” NPT - Conduit Work Adaptor
- G 1/2” - Conduit Work Adaptor
- M20 x 1.5 - Conduit Work Adaptor
Consumption
- 1 W or Higher - Power Consumption
Distance
- 0.11” (3 mm) - Min. Spatial Distance
- 0.23” (6 mm) - Creepage Distance
Electrical Connectors
- Heat-Resistant Flexible PVC - Cable Shielding
- M4 Ring-Typical for Power Supply Unit - Crimping Terminal
- Pin-Typical for Converter - Crimping Terminal
Enclosure Finish
- Grayish Green (Munsell 2.5 GY5.0/1.0) - Case Color
Enclosure, Body Material
- Fiberglass Reinforced Polycarbonate Resin - Case Material
Environmental Protection
- IP53
- JIS Water-Proof
Flow Rate
- 2 m/sec or Less
Humidity
- 10 to 90 % Relative Humidity, Non-Condensing
Length
- 10 feet (3 metres)
- 16.4 feet (5 metres)
- 32.8 feet (10 metres)
Materials of Construction
- Silicone Resin - Permeable Membrane
- Stainless Steel - Tag Plate
Measuring Range
- 0 to 25 mg/L
Mounting
- 4-M5 Screws
- Pipe Mount
- Wall Mount
O-Ring Material
- EPDM
- Ethylene Propylene Rubber
Output
- 24 Vdc ± 1 V
Power Supply
- 100/115/230 Vac at 50/60 Hz
- 24 Vdc
- 24 Vdc ± 10 %
Pressure Range
- psi: 0 to 72.52 (kPa: 0 to 500, bar: 0 to 5)
Repeatability
- 0.1 mg/L or 3 % of Full Scale, whichever is greater
Response Time
- Within 120 seconds (90 % Response)
Sensor, Probe Material
- 316L Stainless Steel - Sensor Unit
Sensor, Probe Type
- 22k NTC
- RTD
Temperature Effect
- Within ± 3 % of Full Scale at ± 5° C (± 9° F) Change in the Range of 0° to 40° (32° to 104° F) - Temperature Compensation Error
Temperature Range
- 0° to 50° C (32° to 122° F) - Temperature of Measurement Water
