DOX8W Calibration Set

Brand: Yokogawa Electric Corporation

This is necessary if the span calibration is to be done using a saturated dissolved oxygen solution. Contents: Air pump, stirrer, stirring element, bubbler, clamp, beaker, and thermometer. 

Note: The calibration set can be used in common regardless of the type of holder.

Specifications

Electrical Connectors

  • Heat-Resistant Flexible PVC - Cable Shielding
  • Pin-Typical for Converter - Crimping Terminal

Flow Rate

  • 2 m/sec or Less

Length

  • Sensor Cable: 10 feet (3 metres)
  • Sensor Cable: 16.4 feet (5 metres)
  • Sensor Cable: 32.8 feet (10 metres)

Materials of Construction

  • Silicone Resin - Permeable Membrane

Measuring Range

  • 0 to 25 mg/L

O-Ring Material

  • EPDM
  • Ethylene Propylene Rubber

Pressure Range

  • psi: 0 to 72.52 (kPa: 0 to 500, bar: 0 to 5)

Repeatability

  • 0.1 mg/L or 3 % of Full Scale, whichever is greater

Response Time

  • Within 120 seconds (90 % Response)

Sensor, Probe Material

  • 316L Stainless Steel - Sensor Unit

Sensor, Probe Type

  • 22k NTC
  • RTD

Temperature Effect

  • Within ± 3 % of Full Scale at ± 5° C (± 9° F) Change in the Range of 0° to 40° (32° to 104° F) - Temperature Compensation Error

Temperature Range

  • 0° to 50° C (32° to 122° F) - Temperature of Measurement Water
show more