Images are representations only.
DOX8W Calibration Set
Brand: Yokogawa Electric CorporationThis is necessary if the span calibration is to be done using a saturated dissolved oxygen solution. Contents: Air pump, stirrer, stirring element, bubbler, clamp, beaker, and thermometer.
Note: The calibration set can be used in common regardless of the type of holder.
Specifications
Electrical Connectors
- Heat-Resistant Flexible PVC - Cable Shielding
- Pin-Typical for Converter - Crimping Terminal
Flow Rate
- 2 m/sec or Less
Length
- Sensor Cable: 10 feet (3 metres)
- Sensor Cable: 16.4 feet (5 metres)
- Sensor Cable: 32.8 feet (10 metres)
Materials of Construction
- Silicone Resin - Permeable Membrane
Measuring Range
- 0 to 25 mg/L
O-Ring Material
- EPDM
- Ethylene Propylene Rubber
Pressure Range
- psi: 0 to 72.52 (kPa: 0 to 500, bar: 0 to 5)
Repeatability
- 0.1 mg/L or 3 % of Full Scale, whichever is greater
Response Time
- Within 120 seconds (90 % Response)
Sensor, Probe Material
- 316L Stainless Steel - Sensor Unit
Sensor, Probe Type
- 22k NTC
- RTD
Temperature Effect
- Within ± 3 % of Full Scale at ± 5° C (± 9° F) Change in the Range of 0° to 40° (32° to 104° F) - Temperature Compensation Error
Temperature Range
- 0° to 50° C (32° to 122° F) - Temperature of Measurement Water
