The product family FLOWSIC100 was designed for emission monitoring tasks.
The "H" versions are suitable for stacks with large diameters and applications with high dust content.
The "M" versions are especially suited for stacks with medium diameter.
The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe).
The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450° C.
The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.
Rugged titanium transducers are standard and suitable under difficult conditions.
The measuring system consists of 2 sender/receiver units or a measuring probe and a MCU control unit.
The MCU is used for input and output of signals, for calculation of volume flow to reference conditions (standardization) as well as user-friendly LCD interface.
Features
Reliable flow measurement for ducts with small up to very large diameters
High durability of the device
No purge air required for applications with gas temperatures up to 260° C
Minimum operating and maintenance costs
Accurate measuring results under difficult measuring conditions
Measurement without pressure loss, therefore no influences on the process
User-friendly operation via SOPAS ET software
Reliable function monitoring due to enhanced diagnosis