Images are representations only.
R-Series Powerlink Linear Position Sensor
Brand: Temposonics an Amphenol Company
Temposonics position sensors fulfil the requirements of the Ethernet Powerlink Standardization Group (ESPG).
Ethernet Powerlink V2 is an open protocol based on the Ethernet-standard according to IEEE 802.3. It is an extension to the Ethernet protocol which allows real-time data communication.
Within the Ethernet Powerlink protocol a CANopen based communication protocol for user data is specified. Powerlink is the only Ethernet protocol that meets hard real-time requirements with a software-only concept. No special Powerlink hardware is needed.
Features- Absolute position information
- Velocity
- Status
Specifications
Approvals & Certifications
- ISO 9001 (DQS)
- CE
- EMC: Electromagnetic Emission EN 61000-6-4, Electromagnetic Susceptibility EN 61000-6-2
- IEC 6008-2-27, 6008-2-6
- UL 61010-1
Communication
- CANopen Based Communication Protocol
- Ethernet Powerlink Standardization Group (ESPG), Powerlink V2 According to IEEE 802.3” Interface
Current
- Current Drain: 110 mA Typical
Display
- LED Diagnostic Display Beside Connector
Electrical Connectors
- M8 4-Pin Female Connector
- Two Male, M12 4-Pin
Electrical Protection
- Overvoltage Protection up to 36 Vdc
- Polarity Protection up to -30 Vdc
Enclosure, Body Material
- Sensor Electronics (Profile & Rod Model): Aluminum
Environmental Protection
- Ingress Protection (Profile): IP65
- Ingress Protection (Rod): IP67
Humidity
- Dew Point, Humidity: 90 % Relative Humidity, Non-Condensing
Hysteresis
- < 4 µm
Length
- Stroke (Profile): 0.98 to 196.9” (25 to 5,000 mm)
- Stroke (Rod): 0.98 to 299.2” (25 to 7,600 mm)
Linearity
- < ± 0.01 % of Full Scale (Min. ± 40 µm)
Materials of Construction
- Rod with Flange: AISI 304 Stainless Steel 1.4301
- Sensor Profile: Aluminum
Metric Connection
- Threaded Flange: M18 x 1.5
Mounting
- Profile: Moveable Mounting Clamp
- Profile: T-Slot Nuts M5” Base Channel
- Rod: Hex Nut M18
Mounting Position
- Any Orientation
Operating Temperature
- 0° to 70° C (32° to 158° F)
Operating Voltages
- 24 Vdc (-15 / 20 %)
Power Supply
- Ripple: < 0.28 Vpp
Repeatability
- < ± 0.001 % of Full Scale (Min. ± 2.5 µm)
Resolution
- Resolution - Displacement: up to 1 µm
Seat / Seal Material
- Seal: Fluoroelastomer
Shock
- 100 G (Single Shock), IEC 6008-2-27
Temperature Coefficient
- < 15 ppm/°C
UNF/UNC Connection
- Threaded Flange: 3/4”-16 UNF-3A
Update Time
- 1 millisecond Up 2,400 mm Stroke Length
- 2 milliseconds Up 4,800 mm Stroke Length
- 4 milliseconds Up 7,600 mm Stroke Length
Vibration
- 15 G (10 to 2,000 Hz), IEC 60068-2-6
Voltage
- Dielectric Strength: 500 Vdc (DC Ground to Machine Ground)
