Images are representations only.
701974 Low Capacitance Probe
Brand: Yokogawa Electric Corporation
Using an active probe or FET probe is an effective way to measure high speed signals.
Even when using a passive probe, you can effectively reproduce waveforms with less ringing or overshoot by devising different ways to connect to ground.
Features- The PBL5000 low-capacitance "transmission line" probe (passive) features both 10:1 and 20:1 attenuation.
- This probe requires a 50 Ω scope/termination and can be used with any oscillscope with a BNC input.
- The change in attenuation is realized by changing resistance on the tip of the probe;
- Can also be used with DC Block 701975.
- For use with a scope which does not have a built-in 50 Ω termination, please purchase a 700976 50 Ω external (BNC) pass-thru terminator.
Specifications
Approvals & Certifications
- CE
Bandwidth
- (-3 dB), DC to 5 GHz
Cable Length
- 3.6 feet (1.1 metres)
Electrical Connectors
- SMA Connector
Input
- 20 Vrms - Max.
- Maximum
Ratio
- 1:10 - Attenuation Ratio
- 1:20 - Attenuation Ratio
Resistance
- 1 kiloohms / 0.4 PF - Input Resistance / Capacitance
- 500 ohms/0.25 PF - Input Resistance/Capacitance
