Images are representations only.
OX400 Low Concentration Zirconia Oxygen Analyzer
Brand: Yokogawa Electric Corporation
The OX400 is a highly accurate and reliable low-concentration zirconia oxygen analyzer that is capable of measuring a wide range of concentrations, from 0 to 10 ppm up to 0 to 100% volume Oxygen.
This is the latest oxygen analyzer from Yokogawa, and its development was based on the company’s long experience and strong track record with this technology.
A proprietary new thin-film deposition technology was used in the zirconia sensor that creates a molecular bond between the zirconia element and the platinum layer.
This prevents separation, enables a reduction in sensor size and ensures a high-speed response and long life.
The OX400 can be used to control and monitor various semiconductor applications, and to control environment, air leakage into inert gas, and other processes.
Features- Long life and high-speed response
- Thanks to the use of Yokogawa’s proprietary new thin-film deposition technology, the sensor has three times the lifespan of those used in our earlier products.
- A cylindrical sensor design facilitates the replacement of measurement gases, thereby helping to assure a high-speed response.
- High performance and high reliability
- Superior repeatability and linearity even at low oxygen concentrations.
- Either pump or aspirator sampling can be selected, depending on the application.
- CE, CSA, etc. certification.
- Built-in functions and a variety of self-diagnosis functions
- Comes with multi selector, auto range, partial range, and pump on/off functions.
- A variety of self-diagnosis functions are provided that detect malfunctions such as heater temperature error, temperature sensor burnout, and sensor resistance value error.
- Superior maintainability
- The sensor can be replaced on-site.
- Compact and lightweight for easy installation.
Specifications
Ambient Temperature Range
- 0° to 40° C (32° to 104° F), Non-Condensing
Applications
- Oxygen Concentration Control in Drying Furnaces
- Oxygen Concentration Control in Gas Production Processes
- Oxygen Concentration Control in Glove Boxes used in Electronics Manufacturing
- Oxygen Concentration Control in LCD Manufacturing Processes
- Oxygen Concentration Control in Semiconductor Related Diffusion
- Oxygen Concentration Control in Solder Pot Flow & Re-flow Furnaces
- Oxygen Concentration Measurements to Prevent Dust Explosions During Powder Transfer
Approvals & Certifications
- CE
- CSA
- EMC EN 61326-1 Class A, EN 61326-2-3, EN 61000-3-2, EN 61000-3-3
- IEC
- KC
- PSE
- RCM EN 61326-1 Class A
- UL
BSP Inlet
- 1/4” BSPT Female - Gas Inlet: Line Connection
BSP Outlet
- 1/4” BSPT Female - Gas Outlet: Line Connection
Cable Length
- 6.56 feet (2 metres) - Power Cable
- 8.2 feet (2.5 metres) - Power Cable
Communication
- Baud Rate: 38,400 bit/sec
- RS-232, One-Way
Consumption
- 100-120 Vac, 200 VA, Max.
- 200-240 Vac, 400 VA, Max.
Diagnostics
- Alarm (Warning): Self-Diagnostics
- Asymmetry Voltage Error - Alarm (Warning): Self-diagnostics
- Calibration Error - Alarm (Warning): Self-diagnostics
- CPU Error (Failure): Self-Diagnostics
- Device Temperature Error - Error (Failure): Self-diagnostics
- Electromotive Force Abnormal - Alarm (Warning): Self-diagnostics
- Fan Stop - Error (Failure): Self-diagnostics
- Heater Temperature Error - Error (Failure): Self-diagnostics
- Heater Unstable - Alarm (Warning): Self-diagnostics
- O₂ Concentration Upper/Lower - Alarm (Warning): Self-diagnostics
- Over-Range Error - Alarm (Warning): Self-diagnostics
- Sensor Defect - Alarm (Warning): Self-diagnostics
- Sensor Resistance Error - Alarm (Warning): Self-diagnostics
- Sensor Unit Error - Error (Failure): Self-diagnostics
- Temperature Sensor Disconnection - Error (Failure): Self-diagnostics
Display
- 4-Digit LED
Electrical Connectors
- D-Sub 9-Pin Connector - Serial Communication
- M3 Screws - External Output Terminals, Contact Input/Output Terminals
Electrical Rating
- 2 A at 240 Vac (120 Vac for 100 V Power Supply) for Resistive Load - Nominal Contact Capacity
- 2 A at 30 Vdc (120 Vac for 100 V Power Supply) for Resistive Load - Nominal Contact Capacity
Enclosure Finish
- Polyester Coating
Flow Rate
- 10 L/minute, Max.
- 200 ± 25 mL/min - Sample Gas Conditions
- Approximately 1 L/minute - Pump & Aspirator Suction Flow Rate
Humidity
- 5 to 85 % Relative Humidity, Non-Condensing - Ambient
Linearity
- ± 2 % of Full Scale
- ± 3 % of Full Scale (0-100 ppm or Less)
Maximum Current
- 2 A DC/AC
Maximum Voltage
- 264 Vac (132 Vac for 100 V Power Supply)
- 30 Vdc (132 Vac for 100 V Power Supply)
Measuring Range
- 0 to 10 ppm
Media
- Gas
- Liquids
- Solids
Mounting
- Panel Mount
- Wall Mounting
NPT Connection
- 1/4” NPT Female - Gas Inlet, Gas Outlet: Line Connection
Output
- 0-10 Vdc (Load Resistance: 10 kiloohms or Greater) - secondary: Analog Output
- 4-20 mA DC, Max.
Power
- 480 VA - Max.
- 60 W - Max.
Power Supply
- 100-120 Vac ± 10 %, 50/60 Hz
- 200-240 Vac ± 10 %, 50/60 Hz
Pressure Range
- psig: 0 to 0.043 (kPa: 0 to 0.3, Mbar: 0 to 3)
Repeatability
- ± 1 % of Full Scale
Resolution
- 0.01 ppm - O₂ (Oxygen)
Response Time
- Within 10 seconds (0-1 % or more)
- Within 30 seconds (less than 0-1 %)
Storage Temperature
- -5° to 50° C (23° to 122° F)
Supply Pressure
- psig: 6.42 to 14.5 (kPa: 65 to 100, bar: 0.65 to 1)
Switch Type
- Relay
Temperature Range
- 0° to 50° C (32° to 122° F), Non-Condensing
Thermal Drift
- ± 2 % of Full Scale/Week
Update Time
- Within 20 minutes - Warm-Up Time
- Oxygen Concentration Control in Drying Furnaces
- Oxygen Concentration Control in Gas Production Processes
- Oxygen Concentration Control in Glove Boxes Used in Electronics Manufacturing
- Oxygen Concentration Control in LCD Manufacturing Processes
- Oxygen Concentration Control in Semiconductor Related Diffusion
- Oxygen Concentration Control in Solder Pot Flow & Re-flow Furnaces
- Oxygen Concentration Measurements to Prevent Dust Explosions During Powder Transfer
