Yokogawa Clamp-On Power Meter, CW10
Images are representations only.

CW10 Clamp-On Power Meter

Brand: Yokogawa Electric Corporation
Request Information
Favorite

The Clamp-on Power Meter CW10 (Single-Phase) is more like a tester type rather than a recorder, which can measure single phase AC and DC Power, Voltage, Currents, Power Factor, Frequency, Harmonics. 

It will also contribute to workers maintenance of not only consuming equipment but equipment for renewable energy such as solar and wind power generation.
Features
  • AC / DC Power up to 600 kW, AC / DC Voltage max. 1,000 V, AC / DC Current max. 600 A
  • True RMS for AC .
  • Harmonics 1st to 25th order
  • Power fluctuation using the ACA Inrush and Peak hold functions.
  • Frequency, Resistance, Continuity, Diode check, Power factor.
  • Up to 9999 counts, approx. 37mm max. diameter of measurable conductor (the jaw opens approx. 45 mm max.)
  • CAT IV 600 V and CAT III 1,000 V compliant for safety.
  • Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping.
  • Non-contact Voltage Detection (Red LED lights up on detection).
  • Easy Operation with the Navigator key.
  • Low Pass Filter, Phase Detection, AC / DC Auto Sense.

Specifications

Brand

Accuracy

  • ± (0.5 % of Reading + 3-Digits) - Frequency
  • ± (0.7 % of Reading + 2-Digits) - DCV
  • ± (1.5 % of Reading + 20-Digits) - DCA
  • ± (10 % of Reading + 10-Digits) - Harmonic Measurement
  • ± (3 % of Reading + 15-Digits) - Peak Hold (ACV & ACA)
  • ± (5 % of Reading + 10-Digits) - Harmonic Measurement
  • 50 ≤ F ≤ 60 Hz: ± (1.5 % of Reading + 5-Digits) - ACA & LPF, ± (1.5 % of Reading + 5-Digits) - DCA
  • 50 ≤ F ≤ 600 Hz: ± (1 % of Reading + 5-Digits) - LPF, ± (1 % of Reading + 5-Digits) 50 to 500 Hz - ACV
  • 60 < F ≤ 400 Hz: ± (5 % of Reading + 5-Digits) - ACV & ACA
  • 60 ≤ F ≤ 400 Hz: ± (2 % of Reading + 5-Digits) - ACA

Approvals & Certifications

  • CE
  • EMC Standards: EN 61326-1, EN 61326-2-1, EN 61326-2-2, EN 55011, EN 61010-1, EN 61010-2-032, EN 61010-031

Battery Life

  • Approximately 20 Hours

Current

  • 100 A - DCA, ACA & LPF
  • 600 A - DCA & ACA

Diameter

  • Approximately 1.45” (37 mm) - Max.

Display

  • 0 to 9,999
  • LED Display

Electrical Rating

  • CAT III 1000 V
  • CAT IV 600 V

Function

  • Back Light Display

Humidity

  • ≤ 45 % Relative Humidity at 40° to 50° (104° to 122° F)
  • ≤ 75 % Relative Humidity at 30° to 40° C (86° to 104° F)
  • ≤ 80 % Relative Humidity at 0° to 30° C (32° to 86° F)
  • 80 % Relative Humidity or Less - Storage Temperature

Insulation Resistance

  • ≥ 100 megaohms at 1,000 Vdc

Maximum Current

  • 600 A

Maximum Voltage

  • 1,000 V

Operating Temperature

  • 0° to 50° C (32° to 122° F)

Power

  • 0 to 600 KW - AC/DC
  • 600 KW

Power Requirement

  • 9 V Alkaline Battery (6LR61)

Resolution

  • 0.020 to 999.9 Hz - Frequency
  • 1,400 V, Max.
  • 140 A, Max.
  • 140 V, Max.
  • 600 A, Max.
  • 850 A, Max.
  • 99.9 % - Harmonic Measurement
  • 99.99 A, Max.
  • 99.99 V, Max.
  • 999.9 V, Max.

Response Time

  • Approximately 15 minutes

Storage Temperature

  • -10° to 50° C (14° to 122° F)

Supply Voltage

  • 1,000 V - Peak Hold (AC Mode Only)
  • 100 V - Peak Hold (AC Mode Only)
  • AC 4300 Vrms at 5 seconds: between the Core & the Voltage Input Terminals - Withstand Voltage
  • AC 6800 Vrms at 5 seconds: between the Voltage Input Terminals & the Case - Withstand Voltage
  • AC 6880 Vrms at 5 seconds: between the Core & the Case - Withstand Voltage

Documentation

Product Drawing

show more