Price
$1,345.00
CAD
Stock
3 In Stock
EPD electromagnetic flow meter is a high-accuracy flow meter manufactured based on the latest international technology.
It is used to measure the non-magnetic liquid and plasma in the enclosed pipe.
Features- The measurement results are not affected by the change in liquid density, viscosity, temperature, pressure and conductivity.
- It can be widely applied in the conducting liquids that may contain fiber, solid granules and suspended matters.
- Enclosure protection rating: IP67/NEMA 4X
- Wide measurement range & high efficiency
- The wide measurement turndown ratio can be reach 1:100, which can be set randomly and achieve high accuracy for small flow measurement.
- Multiple self-diagnosis function
- Power-saving and low fault rate: the measuring tube is without baffle and movable parts, so it won’t cause pressure loss and jam.
- Smart self-detection and self-diagnosis function, as well as various alarms
- The low installation cost
- It is easy-to-install with low requirements for the straight tube section (front 5D and rear 2D)
- 2-wire Analog output
Specifications
Brand
Accuracy
- ± 0.5 % of Reading at 1 m/sec (0.2 % Optional)
- 0.1 % of Pulse Output Accuracy
Ambient Temperature Range
- -40° to 70° C (-40° to 158° F)
Applications
- Dyeing Machines
- Food Industry
- Pharmaceutical Machines
- Seawater Desalination Plants
- Sewerage
- Solar Energy & PCB Wet Processing
- Tapped Water Purification
- Wastewater Treatment Plants
Approvals & Certifications
- ILAC MRA
- TAF
Cable Entry
- Wire Inlet: M20 x 1.5 Female
Cable Length
- 32.8 to 328 feet (10 to 100 metres) - EPD34 Remote Typical
Communication
- Baud Rate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400 bit/sec - EPD30 Standard Typical
- Baud Rate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600 bit/sec - EPD34 Remote Typical
- RS-485 (Modbus): Support for ZigBee Pro-Wireless Transmission
Conductivity
- Fluidic Conductivity: > 5 µS/cm
Consumption
- Power Consumption: < 10 W
Current
- Alarming Current: 22 mA
- Alarming Current: 3.6 mA
Diameter
- Pipe: 40 to 300 mm
Display
- LCM 128 x 64 Pixel Backlit Typical
Electromagnetic Interference Effect
- IEC/EN 61326-1 Class A Table 2
Enclosure, Body Material
- Aluminum Alloy
Environmental Protection
- IP66
- IP67
- NEMA 4X
Flange Material
- Carbon Steel
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - 150#
- 1-1/2” (DN 40) - 300#
- 1-1/2” (DN 40) - JIS 10K
- 1-1/2” (DN 40) - JIS 16K
- 1-1/2” (DN 40) - JIS 20K
- 1-1/2” (DN 40) - JIS 7.5K
- 1-1/2” (DN 40) - PN 10
- 1-1/2” (DN 40) - PN 16
- 1-1/2” (DN 40) - PN 25
- 1-1/2” (DN 40) - PN 40
Flange Size - 10” (DN 250)
- 10” (DN 250) - 150#
- 10” (DN 250) - 300#
- 10” (DN 250) - JIS 10K
- 10” (DN 250) - JIS 16K
- 10” (DN 250) - JIS 20K
- 10” (DN 250) - JIS 7.5K
- 10” (DN 250) - PN 10
- 10” (DN 250) - PN 16
- 10” (DN 250) - PN 25
- 10” (DN 250) - PN 40
Flange Size - 12” (DN 300)
- 12” (DN 300) - 150#
- 12” (DN 300) - 300#
- 12” (DN 300) - JIS 10K
- 12” (DN 300) - JIS 16K
- 12” (DN 300) - JIS 20K
- 12” (DN 300) - JIS 7.5K
- 12” (DN 300) - PN 10
- 12” (DN 300) - PN 16
- 12” (DN 300) - PN 25
- 12” (DN 300) - PN 40
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150#
- 2-1/2” (DN 65) - 300#
- 2-1/2” (DN 65) - JIS 10K
- 2-1/2” (DN 65) - JIS 16K
- 2-1/2” (DN 65) - JIS 20K
- 2-1/2” (DN 65) - JIS 7.5K
- 2-1/2” (DN 65) - PN 10
- 2-1/2” (DN 65) - PN 16
- 2-1/2” (DN 65) - PN 25
- 2-1/2” (DN 65) - PN 40
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
- 2” (DN 50) - 300#
- 2” (DN 50) - JIS 10K
- 2” (DN 50) - JIS 16K
- 2” (DN 50) - JIS 20K
- 2” (DN 50) - JIS 7.5K
- 2” (DN 50) - PN 10
- 2” (DN 50) - PN 16
- 2” (DN 50) - PN 25
- 2” (DN 50) - PN 40
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150#
- 3” (DN 80) - 300#
- 3” (DN 80) - JIS 10K
- 3” (DN 80) - JIS 16K
- 3” (DN 80) - JIS 20K
- 3” (DN 80) - JIS 7.5K
- 3” (DN 80) - PN 10
- 3” (DN 80) - PN 16
- 3” (DN 80) - PN 25
- 3” (DN 80) - PN 40
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150#
- 4” (DN 100) - 300#
- 4” (DN 100) - JIS 10K
- 4” (DN 100) - JIS 16K
- 4” (DN 100) - JIS 20K
- 4” (DN 100) - JIS 7.5K
- 4” (DN 100) - PN 10
- 4” (DN 100) - PN 16
- 4” (DN 100) - PN 25
- 4” (DN 100) - PN 40
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150#
- 5” (DN 125) - 300#
- 5” (DN 125) - JIS 10K
- 5” (DN 125) - JIS 16K
- 5” (DN 125) - JIS 20K
- 5” (DN 125) - JIS 7.5K
- 5” (DN 125) - PN 10
- 5” (DN 125) - PN 16
- 5” (DN 125) - PN 25
- 5” (DN 125) - PN 40
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150#
- 6” (DN 150) - 300#
- 6” (DN 150) - JIS 10K
- 6” (DN 150) - JIS 16K
- 6” (DN 150) - JIS 20K
- 6” (DN 150) - JIS 7.5K
- 6” (DN 150) - PN 10
- 6” (DN 150) - PN 16
- 6” (DN 150) - PN 25
- 6” (DN 150) - PN 40
Flange Size - 8” (DN 200)
- 8” (DN 200) - 150#
- 8” (DN 200) - 300#
- 8” (DN 200) - JIS 10K
- 8” (DN 200) - JIS 16K
- 8” (DN 200) - JIS 20K
- 8” (DN 200) - JIS 7.5K
- 8” (DN 200) - PN 10
- 8” (DN 200) - PN 16
- 8” (DN 200) - PN 25
- 8” (DN 200) - PN 40
Flow Rate
- 0.45 to 254 m³/hour
Frequency
- Frequency Output Scope: 2 to 8 Hz
Input Power
- 100-240 Vac
Input Signal
- Control Input (DI): Dry Contact ON< 200 ohms, 1,000 ohms < OFF, 1-CH
Materials of Construction
- Electrode Material, Grounding Ring: 316L Stainless Steel
- Electrode Material, Grounding Ring: Hastelloy Alloy C-276
- Electrode Material, Grounding Ring: Titanium
- Electrode Material: Tantalum
- Grounding Ring: 304 Stainless Steel
- Lining Material: NBR
- Lining Material: Neoprene
- Lining Material: PTFE
Measuring Range
- Measuring Scope: 0.1 to 10 m/sec (0.33 to 33 feet/sec)
Operating Pressure
- psi: 145 (kPa: 1,000, bar: 10)
Operation
- Tri-Button Operation
Output
- Analog Output: 4-20 mA
- Pulse Mode, Control Output (DO): NPN Transistor 32 Vdc / 200 mA
Output Load
- Maximum
Process Temperature
- -20° to 120° C (-4° to 248° F)
Temperature Coefficient
- Current Output: 100 ppm/°C
Time Constant
- 0 to 100 seconds - EPD34 Remote Typical
- 0.1 to 20 seconds - EPD30 Standard Typical
Vibration
- IEC 60068-2-3
- Papermaking
- Chemical Industry
- Metallurgical Industry
- Drainage
- Waste Water Treatment
- Liquid High-Pressure Metering
- Medical Care
- Food
- Environmental Protection Industries