Images are representations only.
RY8 Relay Output Card
Brand: Yokogawa Electric Corporation
This nest storing type relay output card insulates DCS status output card and motor driving circuit and connects them through the relay.
This card receives contact signal from DCS and at switching time when OFF-ON of contact signal, motor start relay contact (output-1) should be set at ON for certain period of time.
And at switching time when ON-OFF of contact signal, motor stop relay contact (output-2) should be set at ON for certain period of time.
Since one card stores 2 channels, start-stop of 2 motors can be done by one card.
Features- Output contact points consist of 2 contacts: 1 for motor start and the other for motor stop
- Output-1: Dry voltage contact point output for motor start (A contact and B contact points change-over through jumper)
- Output-2: Dry voltage contact point output for motor start (transfer contact point)
- Furnished with test switch convenient for debugging of DCS or operation checking and LED for status display
- Provided with jumper to connect internally both commons of motor start-stop relay contacts to simplify wiring. When common use is not needed, commons can easily be separated through internal jumper pin
Displaying price & availability for United States in CAD Change Location
4 models matching criteria
- Relay Output - Output-1: Output for Motor Start A Contact or B Contact Points (Dry Voltage Contact) Changeover by Jumper
- Test Switch - No Test Switch
100+ In Stock
$1,088.00CAD
Does not ship to United States
- Relay Output - Output-2: Output for Motor Stop Transfer Contact Points (Dry Voltage Contact Point)
- Test Switch - With Test Switch
50+ In Stock
$2,271.00CAD
Does not ship to United States
- Relay Output - Output-2: Output for Motor Stop Transfer Contact Points (Dry Voltage Contact Point)
- Test Switch - No Test Switch
25+ In Stock
$1,516.00CAD
Does not ship to United States
- Relay Output - Output-1: Output for Motor Start A Contact or B Contact Points (Dry Voltage Contact) Changeover by Jumper
- Test Switch - With Test Switch
25+ In Stock
$234.00CAD
Does not ship to United States
Specifications
Dissipation
- 60 mA at 24 Vdc - Current Dissipation
Electrical Connectors
- M3.5 Screw Terminal - Output-1, Output-2
Electrical Rating
- 0.1 A at 125 Vdc - Inductance Load
- 0.2 A at 125 Vdc - Resistance Load
- 1 mA at 5 Vdc - Min. Applicable Load
- 1.5 A at 250 Vac - Inductance Load
- 1.5 A at 30 Vdc - Inductance Load
- 3 A at 250 Vac - Resistance Load
- 3 A at 30 Vdc - Resistance Load
Humidity
- 5 to 90 % Relative Humidity, Non-Condensing
Indication
- LED - Light on (Orange) when Input is ON or Test Switch is ON
Input Signal
- 24 Vdc, more than 30 mA
Insulation Resistance
- 100 megaohms at 500 Vdc between (Input, Power Supply), CH1 Output-1, CH₂Output-1, CH1 Output-2, CH₂Output-2, Alarm Terminal
Mounting
- Nest-Mounting
Operating Voltages
- 125 Vdc - Max.
- 250 Vac - Max.
Output Format
- Relay Output
Screw Material
- Nickel-Plated-Iron
Supply Voltage
- 1,500 Vac/minute between (Input, Power Supply), CH1 Output-1, CH₂Output-1, CH1 Output-2, CH₂Output-2, Alarm Terminal - Withstand Voltage
- 24 Vdc ± 10 % (Ripple Constant Below 5 % Peak-to-Peak)
- 500 Vac/minute between CH1 Output-1, CH₂Output-1, CH1 Output-2, CH₂Output-2, (Input, Power Supply), Alarm Terminal - Withstand Voltage
Temperature Range
- 0° to 50° C (32° to 122° F)
Torque
- Below 6.94 In/Lbs - Fastening Torque
Update Time
- 2 seconds - Output ON Time Width
