Images are representations only.
FP4P Pulse Rate Converter
Brand: Yokogawa Electric Corporation
The FP4P is a compact, front terminal connection type pulse rate converter that receives contact or voltage pulses from a field, and converts them into isolated transistor-contact pulses at a preset pulse rate.
Specifications
Consumption
- 60 mA at 24 Vdc - Current Consumption
Duty Cycle
- 50 ± 30 % - Input Pulse Width with a Duty Cycle
Electrical Connectors
- M4 Screw Terminal
Enclosure, Body Material
- ABS Resin
Frequency
- 0 to 10 kHz - Input Frequency
- 0 to 16.6 Hz - Output Frequency
Humidity
- 5 to 90 % RH, Non-Condensing - Operating Humidity
Input Signal
- -1 to 8 Vdc - Low Level Input Signal
- 2 V or more - High Level Input Signal
- Contact or Voltage Pulse
Insulation Resistance
- 100 MΩ or more at 500 Vdc between Input & Output, Output & Power Supply, & Input & Power Supply
Mounting
- DIN Rail Mounting
- Rack-Mounted
- Wall Mounted
Operating Temperature
- 0° to 50° C (32° to 122° F)
Output
- 100 Vac / 200 mA - Contactless AC Switch
- 30 Vdc / 200 mA - Open Collector
Power Supply
- 24 Vdc ± 10 % (Percentage Ripple is 5 % Peak-to-Peak or Less)
- 24 Vdc, 1 mA - Contact Input Detection Power Supply
Power Supply Effect
- ± 0.1 % of Span or Less for the Fluctuation within the Operating Range of Power Supply Voltage Specification - Effect of Power Supply Voltage Fluctuations
Pulse Range
- 0.0010 to 0.4000 or Less - Pulse Rate
- 30 ± 3 ms - On-time Pulse Width
- 40 µs or more - Output ON Pulse Width
Resistance
- 10 kΩ - Input Resistance
Resolution
- 0.0001 - Setting Resolution of Pulse Rate
Supply Voltage
- 1,500 Vac/minute between Input & (Output & Power Supply) - Withstand Voltage
- 500 Vac/minute between Output & Power Supply - Withstand Voltage
