Images are representations only.
SC8SG Conductivity Detector
Brand: Yokogawa Electric CorporationYOKOGAWA has been supplying superior on-line analyzers for monitoring or controlling the conductivity of liquid or solutions.
Now, YOKOGAWA provides the four-wire conductivity converter, (SC450G), the two-wire conductivity transmitter (FLXA202/FLXA21, SC202).
YOKOGAWA also provides many kinds of detectors/ sensors for accurately measuring liquid conductivity when using converters/transmitters.
The combination of YOKOGAWA’s converters/ transmitter and detectors/sensors meets the demanding ultra pure water requirements of the growing semiconductor and pharmaceutical markets in addition to traditional water quality measurements for standard power plant and chemical applications.
Specifications
BSP Connection
- 1/2” BSPT Female
Cable Length
- 18.04 to 65.61 feet (5.5 to 20 metres)
Electrical Connectors
- Fork Terminal
- M3 Ring Terminal
- M4 Ring Terminal
- Pin Terminal
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - 150# ANSI
- 1/2” (DN 15) - JIS 10K
Flange Type
- Flat Face (FF)
- Raised Face (RF)
Flow Rate
- < 20 L/minute - for Flow through Detectors
Maximum System Pressure
- psi: 145 (kPa: 1,000, bar: 10)
Measuring Range
- 0-0.5 to 0-100 μS/cm - for a Cell Constant 0.01 cm⁻¹
- 0-1 to 0-1,000 ms/cm - for a Cell Constant 10 cm⁻¹
Media
- Liquids
NPT Connection
- 1/2” NPT Female
Principle of Operation
- 2-Electrode System
- 4-Electrode System
RTD Type
- Pt1000
Sensor, Probe Material
- 316 Stainless Steel - Two-Electrode Sensor (Cell Constant: 0.01 cm⁻¹)
- Ethylene Chloride Trifluoride - Two-Electrode Sensor (Cell Constant: 0.01 cm⁻¹)
- Glass - Four-Electrode Sensor (Cell Constant: 10 cm⁻¹)
- Graphite - Two-Electrode Sensor (Cell Constant: 10 cm⁻¹)
- Platinum - Four-Electrode Sensor (Cell Constant: 10 cm⁻¹)
- PVDF (Polyvinylidene Difluoride) - Four-Electrode Sensor (Cell Constant: 10 cm⁻¹)
- Reinforced Epoxy Resin - Two-Electrode Sensor (Cell Constant: 10 cm⁻¹)
Sensor, Probe Type
- RTD
Stem Material
- Polypropylene Resin - Stem (Flow-Through Typical)
- SCS14 - Stem & Chamber Flow-Through Typical
Temperature Range
- 0° to 100° C (32° to 212° F)
Wetted Materials
- 316 Stainless Steel - Sensor-Holding Base
- Fluororubber - Sensor-Holding Base
- Polypropylene (PP) - Sensor Holding Base, Chamber
