Images are representations only.
RC400G Residual Chlorine Analyzer
Brand: Yokogawa Electric CorporationThe RC400G residual chlorine analyzer employs a polarographic system that uses rotating platinum electrodes to provide continuous online measurement of residual chlorine concentration.
By appropriate use of reagents, it is possible to separate residual chlorine (free chlorine + combined-chlorine) from free chlorine for measurement.
The RC400G is an intelligent residual chlorine analyzer that makes extensive use of microprocessors. Its design is based on the know-how gained through Yokogawa's many years of experience with residual chlorine analysis.
Features- Simple, one-touch calibration. Automatic sensor self-diagnostics (zero point, slope, response) during calibration.
- Output range can be set in the field in case when the span is 1 mg/l or more. Remote switching 2-range capability is available.
- Line-segment function available for output signal.
- Simple verification of applied voltage/current characteristics (Plateau characteristic) between electrodes. Allows detailed knowledge of sensor characteristics for the target application to be obtained.
- Improvements to rotating electrodes and glass bead cleaning have been added for even more effective automatic continuous cleaning.
- Waterjet cleaning can be applied for the purpose of particularly dirty applications.
- Easily maintained (easy-to-clean) cell construction.
- Available for special version (for free chlorine measurement) designed to cope with very high concentrations of combined chlorine.
Specifications
Ambient Temperature Range
- -5° to 55° C (23° to 131° F)
Applications
- Factory Cooling Water
- Factory Drinking Water
- Factory Wastewater
- Sewage secondary Treatment
- Water Purification: Raw Water, Mains Water, Mixed Water, Sedimentation Water & Sea Water
Approvals & Certifications
- EMC EN 55011 Class A, Group 1
- RCM EN 55011 Class A, Group 1
BSP Connection
- 1/4” BSPT Female
Cable Length
- 16.40 feet (5 metres)
Cable Material
- PVC Sheathed Cable - Power Cord
Compensated Temperature
- 0° to 40° C (32° to 104° F)
Consumption
- 1.5 mL/min ± 10 %
- 65-210 VA - Power Consumption
- Approximately 5 L/minute - Air Consumption
Current
- 100 mA - Closed Circuit Current
Display
- 4-Digit LED Display
- Digital Display
Electrical Contacts
- Normally Closed & Normally Open
Electrical Rating
- 125 VA, Max.
- 2 A at 220 Vdc, 60 W (Resistive Load) - Max.
- 2 A at 250 Vac, Max.
Enclosure Finish
- Baked Polyurethane Resin Coating - Stand
- Munsell 0.6 GY3.1/2.0, 2.5Y8.4/1.2 - for Mounting Stand & Other Parts
Filter
- Charcoal
Flow Rate
- 0.264 to 1.056 gpm (1 to 4 LPM), for Pure Water or Municipal Water
- 0.53 to 0.79 gpm (2 to 3 LPM) - Water Jet Cleaning Flow
- 1.32 to 2.64 gpm (5 to 10 LPM), for Raw Water or Sea Water
- 1.5 mL/min ± 10 % - Reagent Flow
- 2.11 to 2.38 gpm (8 to 9 LPM) - Backwash Water Flow
- 2.64 to 3.17 gpm (10 to 12 LPM)
- 2.64 to 5.28 gpm (10 to 20 LPM), for secondary Sewage Treatment
- 3.69 to 9.24 gpm (14 to 35 LPM) - Discharge Flow Rate for Seal-less Pump
- 50 mL/min ± 10 % - Sample Flow
- Approximately 500 mL/min (Per Cyclinder) - Filtering Flow
Humidity
- 5 to 95 % Relative Humidity, Non-Condensing - Ambient Humidity
Input
- 10 V - Open Circuit Voltage
Linearity
- ± 3 %
Materials of Construction
- Carbon Steel - Stand Materials
- Platinum - Counter Electrode
- Rigid PVC - Tank Materials
- Rotating Gold Alloy - Indicator Electrode
- Stainless Steel - Stand Materials
Maximum System Pressure
- psi: 11.6 (kPa: 80, bar: 0.8)
Measuring Range
- 0 to 10 mg/L
- pH: 3 to 9 PH
Operating Temperature
- -5° to 55° C (23° to 131° F)
Output Signal
- 1-5 Vdc
- 4-20 mA DC
Power Supply
- 100/110/220 Vac ± 10 %, 50/60 Hz
Pressure Range
- psi: 2.9 to 72.52 (kPa: 20 to 500, bar: 0.2 to 5)
Repeatability
- 2%
Resistance
- 100 kiloohms Min. - OFF Resistance
- 200 ohms, Max.
- 300 ohms, Max.
- 550 ohms - Load Resistance for 4-20 mA Output
Response Time
- Approximately 3 minutes - for Pure Water
- Approximately 4 minutes - for Raw Water
RTD Type
- Pt1000
Span & Zero Effect
- ± 1 %/Month, Max.
Storage Temperature
- -30° to 70° C (-22° to 158° F)
Supply Pressure
- psi: 20.31 (kPa: 140, bar: 1.4)
Temperature Effect
- ± 0.5 %/10° C (18° F) - Effect of Ambient Temperature
Temperature Range
- 0° to 50° C (32° to 122° F)
Wetted Materials
- 316 Stainless Steel
- Acrylic Resin - Measurement Tank
- Ceramic - Pump (Seal-less Pump)
- Fluorinated Rubber (Viton) - Pump
- Hardened PVC - Pump & Tubing/Piping
- Hastelloy - Pump (Seal-less Pump)
- Polyethylene - Tubing/Piping
- Polypropylene Resin - Pump (Seal-less Pump)
- Factory Cooling Water
- Factory Drinking Water
- Factory Wastewater
- Sewage secondary Treatment
- Water Purification: Raw Water, Mains Water, Mixed Water, Sedimentation Water & Sea Water
