Images are representations only.
AQ1300 Ethernet Multi-Field Tester
Brand: Yokogawa Electric CorporationThe AQ1300 series is a compact and lightweight Ethernet tester that is designed to improve both work efficiency and quality at the same time, with function optimized for the network path testing and maintenance of Ethernet networks up to 1G or 10G depending on model chosen.
Easy operation prevents operational errors and stabilizes work quality for routine tasks such as network path testing.
Powerful analysis functions help isolate failures during maintenance work.
The AQ1300 series has two models, AQ1300 and AQ1301 to choose from depending on the measurement interface and bit rate.
You can choose the model suitable for your test needs.
FeaturesWorld's Smallest-in-class 10GbE tester (AQ1300)
The AQ1300 is the world's smallest in-clas 10G Ethernet Tester. It offers exellent mobility for field work, reduces work load, and ensures work efficiency and safety.
- A5- Size
- Easy-to-carry robust structure suitable for field use
- The lightweight （Approx. 1.3 kg (2.9 lbs) makes it more comfortable to carry or hold in the hand at work.
All functions in ONE for Network path test
All the functions needed for field performance testing are integrated into a compact unit. The functions are optimized to improve work efficiency in the field where work hours and working conditions are limited.
- Optical and electrical measurement ports for 10M to 1G (AQ1301) and 10M to 10G (AQ1300) are available
- Built-in Optical power meter (factory-installed option for the AQ1300)
- Equipped with a variety of test functions to evaluate Ethernet performance, such as a throughput test, latency measurement, bit error rate test, and PING test.
More Efficient and Reliable Network Path Test
Network path testing or other routine work require not only work efficiency but also that every worker with any skill level can carry out a proper test with the correct procedure and settings.
Automated tests using the setup files pre-loaded on the tester ensures consistent work quality.
- Auto: Just select a setup file and run it to perform automatic measurement and save the measurement results
- Auto (Remote): Link the two units as master and slave to run automatic tests.
- Remote Control: Control remotely from a PC via GUI
Powerful Failure Analysis Functions
The AQ1300 series provides a variety of functions to reproduce the user's traffic environment for more accurate troubleshooting.
- Function to generate a variety of test frames to reproduce the real traffic environment
- Tests with variable frame length and field, overload test, burst traffic test, and multi-flow test
- Various physical layer analysis functions
Intuitive and Comfortable Graphical User Interface (GUI)
The screen is laid out so that you can understand the information you need such as the setting items and setting states at a glance and a unified operating system offers stress-free operation.
- All the menu keys, operation buttons, and rotary knob are laid out on the right side to allow for single hand operation.
- The operation system is optimized for practical use in network path testing and maintenance
Large LCD Screen
The large screen improves work efficiency and reduces operational errors and mistakes.
- An easy-to-read large color LCD display (5.7-inch, 640 480 pixels)
Specifications
Adapter
- AC Adapter
Approvals & Certifications
- AS
- BS
- BSMI
- CSA
- GB
- KC
- UL
- VDE
Battery Life
- Approximately 1-Hour - Battery Power Supply Operating Time (AQ1300)
- Approximately 2 Hours - Battery Power Supply Operating Time (AQ1301)
- Approximately 5 Hours Charging Time (At 23° C (73.4° F), Power Off)
Channels
- Up to 8-Channels or or up to 7-Channels + Other, (up to 4-Channels in Auto & Auto (Remote) Modes) - QoS Transmission
Communication
- Memory Port: USB Typical-A (For an External Memory Device)
- Remote Port: LAN (RJ45) (10Base-T/100Base-TX)
- Remote Port: USB TYPE-B (Mini USB) (For External PC Control)
- Test Port: RJ45 (10Base-T, 100Base-TX, 1000Base-T)
- Test Port: SFP (100Base-FX, 1000Base-SX, 1000Base-LX)
- Test Port: XFP (10 GBASE-SR, 10 GBASE-LR, 10 GBASE-ER)
Connectors
- Optical Connector: Universal Connector (1.25), SC, FC
Display
- 5.7” Color LCD (640x480) Pixels
- 5.7” TFT Color LCD
Environmental Protection
- Shock-Proof
Filter
- Field/Offset Setting (Pattern), Number of Filters is 2
Frequency
- 50/60 Hz
Function
- Base Filter
- Built-in Optical Power Meter
- Burst Traffic Test
- Emulation
- Ethernet Performance, Such as Throughput Test, Latency Measurement, Bit Error Rate Test
- Field Testing
- In-Band Remote
- Layer 1 Measurement Function
- LFS Generation
- Log
- Loop Back
- Multi-Flow Test
- Optical & Electrical Measurement Ports for 10M to 1 G (AQ1301) & 10M to 10 G (AQ1300) are available
- Optical Power Monitor
- Overload Test
- PC Remote Control
- Ping Test
- Powerful Analysis
- QoS Test
- Receive
- Sequence Error Checking
- Statistics Logging
- Test
- Transmission
Interface Connection
- USB Typical B - Remote GUI
Logging Time
- 0 to 72 Hours: Logging Period
- 1 second: Logging Interval
Measurement Accuracy
- ± 5 % at 23° ± 2° C (73.4° ± 3.6° F), (Condition: 1310 Nm, -10 dBm, SM Fiber)
Measuring Range
- ± 100 ppm Receiving & Variable Transmission Clock (Setting Range) - Layer 1 Measurement Function
Power
- -70 to 10 dBm Continuous Wave - Measurement Power for Optical Power Meter
- -70 to 7 dBm CHOP - Measurement Power for Optical Power Meter
Resolution
- 0.00001 %, bit (IFG), Frames/second - Rate is Variable During Transmission
- 0.1 ppm - Layer 1 Measurement Function
- 1 ppm Setting Resolution - Layer 1 Measurement Function
- 100 Nanoseconds Measurement Resolution (Receive Function)
Supply Voltage
- 100-120 Vac
- 200-240 Vac
Update Time
- 1 millisecond to 1 second - Transmission Interval (Emulation Function)
- 1 μS to 1 S of Interval - Transmission Function
- Hardware-Controlled High-Speed Testing at 1 millisecond Intervals
Wavelength
- 850 / 1,300 / 1,310 / 1,490 / 1,550 / 1,625 / 1,650 Nm - Measurement
