Images are representations only.
SC210G Conductivity Detector
Brand: Yokogawa Electric CorporationYOKOGAWA has been supplying superior on-line analyzers for monitoring or controlling the conductivity of liquid or solutions.
YOKOGAWA provides the four-wire conductivity converter, (SC450G), the two-wire conductivity transmitter (FLXA202/FLXA21, SC202).
YOKOGAWA also provides many kinds of detectors/ sensors for accurately measuring liquid conductivity when using converters/transmitters.
The combination of YOKOGAWA’s converters/ transmitter and detectors/sensors meets the demanding ultra pure water requirements of the growing semiconductor and pharmaceutical markets in addition to traditional water quality measurements for standard power plant and chemical applications.
Specifications
Approvals & Certifications
- CSA
- Material Certificate
BSP Connection
- 1-1/2” BSPT Male
- 1-1/4” BSPT
- 1/2” BSPT Female
Cable Length
- 9.84 to 65.61 feet (3 to 20 metres)
Electrical Connectors
- M3 Ring Terminal
- M4 Ring Terminal
- Pin Terminal
Enclosure Finish
- Epoxy Coated (Baked)
Enclosure, Body Material
- 316 Stainless Steel
- Polypropylene
Environmental Protection
- JIS C0920 Watertight
- NEMA 4
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - 150# (ANSI & JPI)
- 1/2” (DN 15) - JIS 10K
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150# (ANSI & JPI)
- 2” (DN 50) - JIS 10K
Flange Type
- Flat Face (FF)
- Raised Face (RF)
Flow Rate
- < 20 L/minute - for Flow through Detectors
Materials of Construction
- Polypropylene - Chamber Material
- SCS14 - Chamber Material
- Stainless Steel - Tag Plate
Measuring Range
- 0-0.5 to 0-200 μS/cm (Cell Constant: 0.05 cm⁻¹)
- 0 to 200 μS/cm to 0 to 20 ms/cm (Cell Constant: 5 cm⁻¹)
NPT Connection
- 1/2” NPT Female
- 1-1/2” NPT Male
- 1-1/4” NPT Male
O-Ring Material
- Fluororubber (FKM)
- Perfluoroelastomer - FFKM
Pressure Range
- psi: 0 to 145 (MPa: 0 to 1, bar: 0 to 10) - for Chamber Material: SCS14
- psi: 0 to 72.52 (kPa: 0 to 500, bar: 0 to 5) - for Chamber Material: Polypropylene
Principle of Operation
- 2-Electrode System
Seat / Seal Material
- Perfluoroelastomer - Chamber Seal
Sensor, Probe Length
- 5.90” to 78.74” (150 to 2,000 mm) - Sensor Length
Sensor, Probe Material
- 316 Stainless Steel
- Glass
- Platinum
Sensor, Probe Type
- Thermistor (PB36NTC)
Temperature Range
- 0° to 100° C (32° to 212° F) - for Chamber Material Polypropylene
- 0° to 105° C (32° to 221° F) - for Chamber Material SCS14
